| |
Maximum Board Size: 18" x 22"
FR4
Getek
Polyimide
BT
Nelco 4000-13
Rogers 4003
Rogers 4350
Rogers RO 3003
Duroid 5870
Taconic 6000+RF35
Ohmega Ply
|
| |
|
Minimum |
Maximum |
| Inner Layer |
Plane |
¼ oz |
5 oz |
| Signal |
3 oz |
| Outer Layer |
|
1/8 oz |
5 oz |
| Maximum number of layers: |
Determined by Customer |
| Maximum board thickness: |
.500" |
Laminate and Pre-preg materials per IPC-4101
Multifunctional FR4, Getek, Polyimide, BT, Gore, Pyralux, Nelco 13, Allied 408, Rogers
Pyralux 4403, Taconics Rogers. Glass types 106,1080,2116,7628
|
| Minimum line width: |
.003" |
| Minimum conductor spacing: |
.003" |
| Minimum core thickness: |
.0016" |
| Minimum dielectric: |
.0016" |
|
Buried and Blind Vias
|
|
Sequential lamination construction
|
|
Buried resistors
|
|
Impedance Design Engineering support (circuit width/spacing and dielectric thickness)
|
| Smallest mechanical drilled hole size: |
.006" |
| Smallest laser drilled hole size: |
.005" |
| Minimum slot width size: |
.020" |
| Minimum annular ring: |
.001" |
| Signal pad larger than hole minimum: |
.014" inner .012" outer |
| Plane clearance larger than finished hole: |
.025" |
| Maximum Hole Aspect Ratio |
| Solder mask over bare copper |
| Hot Air Solder Level |
| Immersion gold |
| Immersion silver |
| Electroless gold |
| Electrolytic gold (hard and soft) |
| Meets NASA Outgassing |
| Per IPC-SM-840 |
| Photo-Imageable: |
Enthone, DSR 3241 |
| Dry film: |
Dupont Vacrel 8000 series and Dynachem 5050 |
| Soldermask Colors |
Red, Green, Blue, Black, Clear |
| Minimum pad clearance |
.001" LPI .003" Dry film |
| Legend Colors |
White, Black, Red, Blue |
| Board Dimensions tolerance |
+/- .005" |
| Minimum radius |
.010" |
| Beveling and Scoring |
| Edge Milling |
| Countersinking and counter-boring |
| Flying probe test compliant with IPC ET-652 |
| CAD net-list testing |
| Probe testing down to .008" |
|
| Isolation Parameter |
2 ohms |
| Continuity Parameter |
10 ohms |
Impedance coupons with board serializations
Measurements of individual traces
Single ended and differential impedances
Custom impedance coupons if requested
Cross-section evaluation per IPC-6012
Board Layer Verification
UL Approved E73924
Ionic contamination testing
Quality System modeled to ISO 9002 specifications
In Process Quality Control
Outgoing Quality Control
IPC-A600 and IPC 6012 trained personal
NIST calibrated measurement
|